Underground Utility Mapping in Pune

Rates and page checked: 23 October 2026

What do you get from underground utility mapping in Pune?

Underground utility mapping in Pune produces a record of what lies beneath a defined area – a campus, a township, an industrial plot or a length of road – sorted by type of service. A route survey asks whether one new line will fit; a map is meant to be kept and consulted for every later job on that ground. The standard output from our crews is:

• surface marking of each detected service in its utility colour;
• a signed report listing every find by layer – power, water, sewer and drainage, telecom, gas and unknown – with position, approximate depth, detection method and confidence;
• a plain note of the areas left unscanned and the reason.

CAD and GIS drawing sets built from that record are available as a separately quoted item. The general approach is described on our utility mapping service page.

Which Pune sites most need a utility map?

• IT parks and campuses in areas such as Hinjawadi and Kharadi, where buildings, fibre and power were added in phases and estate teams need one record for future works.
• Industrial plots in the Pimpri-Chinchwad belt, extended over the years, with services from earlier layouts left in the ground.
• Roads along Pune Metro corridors, where services were shifted and their new positions should be fixed on record.
• Old-city lanes, where lines from many periods are layered under narrow streets and old plans survive only in pieces.
• New townships on the city's edges, where developers want an as-built check before roads are surfaced.

Each of these is mapped on a grid of radar lines rather than along a single line. Our firm has no tie-up with PMC, MSEDCL, Pune Metro or any development authority; we map for the owner, developer or contractor who commissions the work.

Can the work follow subsurface utility engineering practice in Pune?

Yes. Subsurface utility engineering in Pune, as anywhere else, grades each piece of information by how it was obtained. In our report a service can appear as:

1. taken from existing records only;
2. detected on site by radar or EM and marked on the ground;
3. confirmed by a trial pit opened at that point on request.

The grade guides the designer: a line known only from an old plan is treated with more caution than one that has been seen in a pit. Our article on SUE quality levels explains the standard scale and how each level is reached.

When are 3D utility mapping services in Pune worth it?

Most mapping runs on 2D radar lines at a set spacing, which suits roads and open ground. 3D utility mapping services in Pune use a dense grid of closely spaced lines over a small area, so the data can be viewed as depth slices. The extra lines pay off where services cross at odd angles or bunch together:

• at major junctions carrying several owners' services;
• around a planned shaft, bore pit or foundation;
• at plant rooms and substation entries inside campuses.

Because 3D needs more scan length per square metre, it is priced on the lines required at the usual metre rate. Our comparison of 3D GPR and 2D line survey sets out the trade-offs.

How is utility corridor mapping in Pune done on long roads?

For utility corridor mapping in Pune, a road is scanned in continuous lines along both shoulders, and along the carriageway where access allows, with cross-lines at regular gaps and at every chamber, culvert and junction. Findings are sorted into layers so a planner can see, for instance, where water and power share a shoulder and where a lane remains free for a new service. Our utility corridor mapping page covers the method in detail.

Smart city underground mapping in Pune follows the same pattern over a wider network of roads, with the aim of a record the owner can keep adding to as each new work is completed.

Can a GIS utility mapping agency in Pune also supply CAD files?

We can. Clients looking for a GIS utility mapping agency in Pune, or for underground utility CAD drawing services in Pune, can order layered drawing sets built from our survey record – DWG layers for design teams or GIS files for a network database. These sets are quoted separately from the survey rate, so tell us at enquiry stage which format and layer standard you work to. More detail is on our CAD and GIS utility mapping page.

How is utility mapping in Pune priced?

Mapping uses the same rate card as route work: ₹24 per metre of scan line for a standard survey and ₹32 per metre for the L-section survey. A grid needs several lines over each area, so the quote is built from the total scan length the grid requires. Pune orders carry a 4 km minimum length and a ₹1,00,000 minimum per project; GST is extra.

• Campus needing 7 km of grid lines: ₹1,68,000.
• Industrial plot needing 2 km of lines: billed as 4 km (₹96,000), then raised to ₹1,00,000.
• 20 km township road network: ₹4,80,000.

Discounts of 25%, 40% and 50% apply to the whole order beyond 100, 500 and 1,000 km. Crew mobilisation, night working, traffic or permit arrangements and CAD/GIS drawings are priced outside the metre rate. All slabs are listed on the GPR survey price list, and other work in the city is covered on our GPR survey in Pune page.