Mezux Store · PLC Splitters
PLC Splitters for FTTH: 1x2 to 1x64 in Bare, ABS Box and Cassette
PLC fibre splitters for GPON and FTTH: 1x2 to 1x64 in bare steel tube, ABS box and LGX cassette, SC/APC or SC/UPC. 1x8 ABS SC/APC at ₹1,899 + GST.
Price list · ready to order
PLC Splitters: prices & cart
Prices are before GST (18% is added on the invoice). Add to cart and send the order request, or click Get Latest Price for a bulk or project rate.
View & get quotePLC Splitter 1x8 SC/APC, ABS Box
View & get quote1x8 bare steel tube, 0.9 mm
View & get quote1x16 ABS box, SC/APC
View & get quote1x32 rack-mount 1U, SC/APC
View & get quote2x16 ABS box, SC/APC
View & get quote1x2 FBT 30/70 with SC/APC
What a PLC splitter does
A planar lightwave circuit (PLC) splitter divides one fibre into many outputs with an even share of light on every port. In a GPON network a single OLT port feeds a 1x8, 1x16, 1x32 or 1x64 split, often in two stages, so dozens of homes share one fibre back to the exchange.
Splitter loss and your power budget
Every split costs light. As a rule of thumb, each doubling of outputs adds about 3 dB of loss, so a 1x8 splitter typically loses around 10 dB and a 1x32 around 16–17 dB, before connector and fibre losses. Check the datasheet value against your OLT and ONT optics, and keep enough margin for future repairs.
| Split ratio | Approximate loss | Common use |
|---|---|---|
| 1x2 | about 3.5 dB | Protection or small taps |
| 1x8 | about 10.5 dB | FAT box or building level |
| 1x16 | about 13.5 dB | Larger buildings |
| 1x32 | about 17 dB | Single-stage GPON |
Figures above are typical maximums from common datasheets; the exact value for the unit you buy is on its datasheet.
Which form factor?
- Bare / steel tube: spliced in, smallest, goes inside closures.
- ABS box with connectors: plug-and-play, the usual choice for FAT boxes.
- Cassette / rack: for exchange and POP racks with many outputs.

Get the latest price
Tell us the type, size and quantity.
FAQ
Questions about plc splitters
Should splitter connectors be APC or UPC?
For GPON/FTTH use SC/APC unless your network standard says otherwise. Keep the whole network on one polish.
One-stage or two-stage splitting?
Two-stage (for example 1x4 then 1x8) spreads splitters closer to homes and saves feeder fibre; one-stage 1x32 keeps all splitters in one place for easier fault finding.
Do you supply 1x32 and 1x64?
Yes. Use Get Latest Price with the form factor and connector type you need.
Shop by category
Other categories








Get the best quote for PLC Splitters
Latest price, GST invoice and delivery details in one written quote.






