Click image for a quotePLC Splitter 1x8 SC/APC, ABS Box
Bulk, project or custom order?
Share your number for the best price.
| Split ratio | 1 x 8 |
|---|---|
| Technology | PLC (planar lightwave circuit) |
| Connectors | SC/APC on input and outputs |
| Package | ABS box module |
| Typical use | FAT boxes and building distribution |
| Typical insertion loss | about 10.5 dB maximum (see unit datasheet) |
A plug-and-play 1x8 split for FTTH
This 1x8 PLC splitter divides one incoming fibre into eight equal outputs, ready-connectorised with SC/APC on every port. The ABS box package protects the splitter chip and the short fibre leads, so it can sit directly inside a FAT box or distribution box and be patched without splicing.
Where a 1x8 fits
A 1x8 is the most common second-stage splitter in GPON designs: for example, a 1x4 at the cabinet feeding 1x8 splitters in FAT boxes gives a 1x32 overall split. It also works as a single stage for small buildings and lanes with up to eight homes.
Before you install
- Check your power budget: a 1x8 adds roughly 10 dB of loss before connectors and fibre.
- Keep every connector capped until use and clean before mating.
- Label outputs by home or flat number.
Pair it with our 8-port FAT box, or see all PLC splitters.
FAQ
Questions about this product
Is ₹1,899 the bulk price?
₹1,899 + GST is the single-piece price. For 10 or more, use Get Latest Price.
Can I get it with SC/UPC connectors?
Yes, on request. Make sure it matches your network polish.
Will it fit your FAT box?
Yes, the 8-port FAT box has a slot for a 1x8 splitter.
You may also need
Related products
View & get quoteSC/APC – SC/APC Simplex Patch Cord, 3 m
View & get quoteSC/APC Pigtail 0.9 mm, 12-Colour Set
View & get quoteFAT Box 8 Port, Outdoor IP65
View & get quoteATB Termination Box 1 Port SC/APC, Pack of 10
Get the best quote for PLC Splitter 1x8 SC/APC
Latest price, GST invoice and delivery details in one written quote.






