OFC & Telecom Route GPR Survey in Greater Noida

Rates and page checked: 23 October 2026

What does a telecom cable route survey in Greater Noida check?

Before a fibre duct is laid, the contractor needs to know three things about the planned route: what is already buried there, how much clear space is left, and where a bore can cross safely. A telecom cable route survey in Greater Noida answers those questions with radar and electromagnetic locating along the full length.

The survey records:

• existing telecom cables and ducts, including those of other operators;
• power cables, street-light circuits and earthing runs;
• water mains, service pipes, sewers and storm drains;
• chambers, handholes and covers seen on the surface, tied to what lies between them;
• stretches where radar could not see clearly, with the reason stated.

Findings are marked on the ground in utility colours and set out in a signed report. The general scope of this work is on our OFC route GPR survey service page.

Why do fibre routes in planned Greater Noida sectors still need a scan?

Greater Noida's road network was laid out by GNIDA with margins reserved for services, which helps. Over time, though, those margins have taken power cables from NPCL, the electricity licensee, water and drainage lines, and ducts from more than one telecom operator, each laid at its own depth and often recorded separately. Where an optical fiber route survey in Greater Noida finds trouble, it is usually because a margin that looks empty on a drawing is already full on one side.

Points that commonly slow a duct job here:

• sector roads where older and newer ducts run close together;
• campus frontages in the Knowledge Park area, where institutional connections branch off the main road;
• approaches to the Yamuna Expressway, which a backbone route may need to cross by bore;
• roads near the Aqua Line metro, where services may have been shifted during construction.

Mezux Touch is not affiliated with GNIDA, NPCL, any telecom operator or any other authority; we are engaged by the contractor or owner. For the city as a whole, see our Greater Noida GPR survey page.

How is duct feasibility judged along a Greater Noida road?

Feasibility is about space, not just the presence of services. From the scan we look at each stretch and ask whether the new duct fits, and where:

1. Which side of the road has the clearer margin, stretch by stretch.
2. What depth band is free between shallow services and deeper mains, so the duct can be laid at a sensible cover.
3. Where chambers can sit without landing on an existing line.
4. Where the route must switch sides, which usually means a road crossing.

One limit is worth stating plainly: radar can show that a duct exists, but not whether it is occupied or which operator owns it. Ownership and spare capacity come from records and the owners themselves. Our guide to GPR scanning for OFC routing covers how scan findings turn into a duct alignment.

Trenchless utility survey in Greater Noida: how are bore crossings checked?

Many fibre routes cross major roads by HDD to avoid cutting the carriageway. For a trenchless utility survey in Greater Noida, we scan along the planned bore path and around both pit areas, with lines closer together than on the open stretches. The aim is to show the drilling team the depth band that is free of known services and the services they must stay clear of.

Where the bore path cannot be fully scanned – a median with restricted access, for example – the report says so, and a trial pit at a critical point can be dug on request. Our HDD route survey services are described on the HDD route survey page. We also own 18 HDD rigs, though the survey and the drilling are quoted as separate jobs.

Does an OFC route in Greater Noida need an L-section?

Only when the work order asks for one. A standard survey marks where services are and their approximate depth. An L-section survey does the same scan and adds a depth profile of the detected services along the duct route, at ₹32 per metre instead of ₹24. Some operators and main contractors require it for design approval; many FTTH spurs do not. If the requirement is unclear, send us the clause and we will advise.

What does an OFC route survey in Greater Noida cost?

The survey is priced by the metre. Because Greater Noida is within Delhi NCR, a 4 km minimum length is the only floor, and the ₹1,00,000 project minimum used outside the NCR does not apply. GST is charged on top.

Whole-order discounts start above 100 km (25%), rise above 500 km (40%) and reach 50% above 1,000 km. Mobilisation, night-shift work, traffic arrangements or permissions and CAD/GIS drawing sets are never inside the metre rate; they are quoted as their own items. All slabs are on our GPR survey price list.