OFC & Telecom Route GPR Survey in Faridabad

Rates and page checked: 23 October 2026

Why order a telecom cable route survey in Faridabad?

A fibre route on paper usually shows a clean line along one side of the road. On the ground that strip may already hold another operator's ducts, an LT cable, a water main and a sewer manhole every few dozen metres. A telecom cable route survey in Faridabad tests the paper line against what is actually buried before any trench is opened or bore is drilled.

The survey answers three questions for the network planner:

1. Is there enough clear width and depth along the proposed side of the road?
2. Where are the pinch points – chambers, crossings, crowded junctions – that force a change of side or a bore?
3. What lies along each planned HDD path?

Our general method for fibre work is set out on the OFC route GPR survey service page.

Which Faridabad corridors are hardest for new fibre?

Ground conditions for OFC differ sharply from one part of the city to another. A rough guide:

For a city-level view, see our Faridabad GPR survey page.

How is duct feasibility judged on a Faridabad road?

Feasibility is not a yes-or-no stamp. Our report shows, section by section, how much of the planned strip is free of detected services and at roughly what depth the existing ones lie. With that, the planner can decide between staying on the chosen side, moving to the other side, using the footpath or berm, or boring past a congested stretch.

Things we pay particular attention to on an optical fiber route survey in Faridabad:

• existing HDPE ducts, which are hard to see when empty and are often stacked together;
• manholes and handholes of other operators, recorded with position;
• LT and street-light cables running in the same margin;
• water service connections crossing the route to each plot;
• drains, culverts and any buried structure across the line.

Our article on GPR scanning for OFC routing explains how these targets look on radar.

Trenchless utility survey in Faridabad: what is scanned for each HDD shot?

Fibre in this city is often laid by horizontal directional drilling, to cross the highway, a sector dividing road or a busy market frontage without open cutting. A trenchless utility survey in Faridabad treats every shot as its own target area:

• Entry and exit pits – scanned on a grid so the pits are not dug onto an existing line.
• The bore path – lines across and along it, noting services at each depth band the radar reaches.
• Approaches – a few metres beyond each pit, because the drill head does not turn sharply.

Since we run 18 HDD rigs of our own besides 58 GPR systems, our HDD route survey services in Faridabad are planned with the drilling method in mind. Details are on our HDD route survey page.

Do power networks change where fibre can run?

They often do. In Faridabad the power network belongs to DHBVN (Dakshin Haryana Bijli Vitran Nigam), whose HT and LT cables share many of the same road margins that fibre routes want. A new duct laid right above an existing power cable invites trouble for both owners later. The survey shows where power cables run so the duct can keep a sensible offset, and where a crossing is unavoidable it is placed and recorded. We have no link with DHBVN, HSVP or the Municipal Corporation Faridabad, and we act only for the client who orders the survey. Power cable routes have their own Faridabad HT/LT cable route survey page.

What does a fibre route survey in Faridabad cost?

Every metre scanned is billed at ₹24 for a standard survey, or ₹32 when an L-section depth profile is ordered. Inside Delhi NCR, which includes Faridabad, the 4 km length floor is the only minimum, and there is no ₹1,00,000 project floor. GST comes on top. Some worked figures before GST:

• a 2.6 km FTTH spur ordered alone – billed as 4 km, ₹96,000;
• a 15 km ring along sector roads – ₹3,60,000;
• the same 15 km with an L-section – ₹4,80,000;
• a 600 km multi-city backbone programme – 40% off every metre, ₹86,40,000.

Orders above 100 km get 25% off throughout, above 500 km 40%, above 1,000 km 50%. Mobilisation, night-shift working, traffic arrangements and permissions, and CAD/GIS drawing sets are charged as separate items. The full slab table is on the GPR survey price list.

What does the planner receive after the survey?

The standard output is ground marking along the alignment and a signed report. The report lists each detected service with its position and approximate depth, notes the method that found it, states the depth reached on each section and names every stretch we could not scan. Feasibility comments are given per section. Where a client wants a full telecom infrastructure survey in Faridabad recorded as drawings, CAD or GIS sets can be prepared as a separately quoted item. Operators planning wider NCR networks may find our note on OFC route survey for Delhi NCR operators useful.