Authority works — YEIDA
YEIDA GPR Survey for Expressway Sectors, Villages and Plots
Utility scans for new YEIDA sectors, village pockets and allotted plots, and a clean underground record from day one.
Quick AnswerA YEIDA GPR survey finds what is already buried along the Yamuna Expressway before new sectors, roads or buildings go in. Village supply pipes, tube-well cables and pipelines are typical finds. It uses ground penetrating radar (GPR) and locators, and it can also record new services as they are laid, so the area starts with an accurate underground map. See what we do: smart city underground mapping.
Why does a YEIDA utility survey matter on mostly new land?
"Greenfield" rarely means empty underground, and new sectors are the best chance to start with a correct record. Much YEIDA land was farmland and village land until recently. It can hold tube-well cables, irrigation pipes, village supply lines, old wells, drains and long-distance pipelines. A YEIDA utility survey finds these buried utilities before road, sewer or building work disturbs them.
The Yamuna Expressway Industrial Development Authority was set up in 2001 under a 1976 Uttar Pradesh industrial areas law. Its land follows the 165 km expressway between Greater Noida and Agra, opened in 2012. It includes the Noida International Airport site at Jewar, with industrial sectors, plot schemes and institutional land rising on former fields.
What can lie under farmland and village land?
- Tube-well and farm power cables: shallow, armoured or not.
- Irrigation pipes: plastic or concrete lines from tube wells, laid by farmers.
- Village supply lines: laid by government schemes, with records held elsewhere if at all.
- Drains and minor channels: some filled in and forgotten.
- Old wells and soak pits: voids that matter for foundations as much as for services.
- Long-distance pipelines and cables: route markers are the first clue, and operator rules apply.
Plastic irrigation and water pipes carry no signal for a locator, so radar does most of the work, followed by trial pits on anything that affects the design. There are details of underground pipeline detection on our service page.
How do village pockets differ from new sectors?
| Area | What is underground | How we survey it |
|---|---|---|
| Village abadi inside a sector | Shallow water lines, drains, LT cables, soak pits | Close radar lines in lanes, chamber checks |
| Farmland being converted | Tube-well cables, irrigation pipes, old wells | Grid scan of the plot or corridor |
| New sector roads | Recently laid mains, sewers, ducts | Scan and verify against as-laid data |
| Allotted industrial plots | Field services plus new frontage connections | Plot grid and frontage corridor |
| Expressway and airport-side land | Owner-controlled utilities and ducts | Only within the client's cleared area |
Table note: the drawing marks which lines are detected, traced or exposed, so a designer can tell field evidence from assumption.
Can the survey create the first underground record for a sector?
Yes, and here a young authority area has an advantage over an old city. While services are being laid, a scan of each finished stretch, compared with the contractor's as-laid drawing, catches errors while the trench is fresh. Verified lines go into a GIS layer with type, size, depth and date, so the next project starts from correct utility maps.
Each verified stretch is checked against the as-laid sheet for:
- Alignment: is the line where the drawing says, within the agreed tolerance?
- Depth: does the cover meet the design, especially under future road crossings?
- Connections: are branches and chambers where they are shown, and are any missing?
- Clashes: has the new line been laid too close to an existing one?
Differences are listed stretch by stretch for correction before handover.
These layers come as CAD and GIS utility files for the client's own system. Township and industrial park developers in the YEIDA area use the same approach for handover records.
What should you know about the airport and expressway areas?
Land and utilities under the airport or expressway operator follow their own rules, and our survey stays within the client's cleared area. Many plots and roads sit beside these assets. Our guide YEIDA site survey explained covers the wider planning and survey questions for sites around Jewar.
For a plot beside such an asset, we scan to the boundary and show external services from records, labelled as reported.
How does the ground near the Yamuna affect the work?
Floodplain soil with a shallow water table reduces radar depth, so we scan closer and verify more. In geophysical surveys of this kind, wet ground absorbs the radar waves before they return as reflected signals. Away from the river, dry fields suit it well. Low land and irrigated fields near the Yamuna stay wet after the monsoon and irrigation season.
We choose the antenna for the depth that matters, use the locator on every metallic line, and confirm key points with trial pits. Local crew and soil notes for the neighbouring area are on our page on GPR survey in Greater Noida.
Recording new services before backfill
YEIDA's newest sectors are being serviced now, the cheapest moment to record what goes into the ground. While a trench is open, our total station picks up the pipe or duct crown, bends, valves and joints, and DGPS ties each point to the sector control. You get an as-laid record with coordinates and levels, not a design line copied onto a map. Combined with a ground penetrating radar survey of nearby village services, the area starts with an underground record later contractors can trust. See DGPS for new townships and recording pipes before backfill.
What does a YEIDA utility survey cost?
Sites in Gautam Buddh Nagar, including the Jewar side, are in Delhi NCR, so the ₹50,000 minimum applies there. YEIDA land further towards Agra that lies outside the NCR carries the ₹1,00,000 minimum. Standard GPR scanning costs ₹24 per metre and an L-section with depth profile costs ₹32 per metre. Whole orders above 100 km earn 25% off, above 500 km 40% and above 1,000 km 50%. GST is extra.
For a 10-acre plot scanned on a two-way grid at 10-metre spacing, about 8 km of lines in all, the standard rate gives ₹1,92,000 plus GST. A short frontage check of 400 metres falls under the ₹50,000 minimum. Share the plot or route, and get a written quote for Greater Noida and YEIDA sites.
Mezux Touch's salaried crews walk every YEIDA job with radars from the company's own stock, and none is outsourced. YEIDA has commissioned surveys from us itself, and the developers, EPC firms and township consultants on its sectors book us for plots and roads too. For YEIDA utility mapping, share the sector and plot details.
Frequently asked questions
Is a utility survey needed on land that was farmland?
In most cases, yes. Tube-well cables, irrigation pipes and village lines are common and rarely recorded.
Can you find old wells on a plot?
Large buried objects such as wells and soak pits show clearly on radar, and we mark them for the structural engineer.
My site is on the Greater Noida side of the boundary. Who should I contact?
We cover both areas. See who to call for Greater Noida Authority utility survey for that side.
Can you check a contractor's as-laid drawings?
Yes. We scan completed stretches and compare them with the as-laid data, then report the differences in the GPR data.
Do you work in Gautam Buddh Nagar villages?
Yes, including village lanes within sector boundaries, with close-spaced scanning of utility lines.
How soon can a crew reach a YEIDA site?
For sites in Gautam Buddh Nagar, on confirmation day, with the following business day as the limit. Our team member nearer Agra covers the far sectors on the same terms. Any travel cost that applies appears in the quote.
Get a written quote for YEIDA works
UP NCR authorities
Written by Saniya Parveen · Technically reviewed by Rahul Rai · Updated 8 November 2026