Total station — Rajasthan
Total Station Survey in Jaipur for Walled City Sites
Bazaar façades inside the Walled City, Sitapura shed layouts and as-builts, observed to 5 mm + 3 ppm in the cool hours before shimmer sets in.
Quick AnswerA total station survey in Jaipur takes over where arcaded bazaars and haveli rows leave GNSS receivers half blind. Façades, buildings and plots are fixed to 5 mm + 3 ppm, and columns, bolts and footings are pegged where the drawing puts them. In the hot months long shots are finished by late morning, ahead of the heat haze. A Jaipur-based colleague starts fieldwork the moment you approve, or no later than the next working day. Travel cost, if applicable, is listed separately. Read our total station survey for Jaipur sites.
When is an optical instrument worth booking in Jaipur?
Wherever buildings close in, wherever millimetres matter, and wherever something must be set out on the ground exactly as drawn. Three Jaipur briefs dominate. The first is building and frontage records inside the Walled City, and the second is shed and machine-base layout at Sitapura and the Vishwakarma Industrial Area. The third is as-built or stake-out work along the newer roads and corridors.
Sawai Jai Singh II laid out the Walled City in 1727 as a grid of wide bazaars crossing at chaupars. UNESCO added it to the World Heritage list in 2019. Its arcaded shopfronts and havelis stand in continuous rows, so satellite receivers see little sky at street level and a total station does the work instead. The instrument combines an electronic theodolite with electronic distance measurement, so one set-up fixes each point from its angle and range.
How does heat change the way we measure?
Hot ground bends and blurs the line of sight, so long sights are kept for the cooler hours and held well above the ground. By mid-afternoon in May the layer of air over tarmac or open ground wobbles like water, and a reflector two or three hundred metres off appears to jump about. That shimmer is refraction, and it degrades both angles and distances. We start at first light, keep sights shorter in the hottest weeks, raise the instrument and prism where we can, and finish long lines before midday.
Frontage surveys in the Walled City
Each façade is measured along its length and height, with the arcade, plinth, openings and projections shown in relation to the road edge. Heritage controls in the old city make the line and look of a frontage important, and many owners need an exact drawing before repairs or alterations. The traverse runs along the bazaar, with short legs past parked vehicles and handcarts, and this detail survey picks up points without a prism where a wall cannot be reached. We aim to finish before the bazaars get crowded. Every building is tagged on the sheet with its door number and bazaar name, so the owner, architect or reviewing office can pick it out unaided.
Setting out a factory shed
Bearing and distance from pillar C1, oriented on C2, place every column centre, bolt cluster and floor level; a separate set-up on C3 then confirms them.
On sandy ground footing pits widen as they are dug, so offset pegs go well outside the excavation. A check visit after the bolts are cast, and before the steel arrives, catches any bolt group that moved in the pour.
Recording frontages before road and corridor works
A dated survey of every building line, step, ramp and boundary wall along a route, made before construction starts, so later disputes can be settled from measurements. When a road is widened or a corridor is built, owners along it often claim that steps, walls or drains were damaged or moved. A frontage record taken by total station before work begins, with photographs tied to each point, answers those claims quickly. Jaipur's planned metro extension and its widening roads make such a record useful to contractors and property owners alike.
What will you receive?
DWG and PDF sheets (site plan, elevations or peg records, as the job needs), every station's coordinates, and a brief statement of how the loop closed. For stake-out of construction layouts we also hand over a signed record of what was marked, when and from which control. A site engineer needs that document if a dispute arises later.
How does this work with the other Jaipur surveys?
GNSS control points sit underneath it, and its detail frequently ends up on a contour sheet. Pillar positions come from DGPS survey in Jaipur: scope, time and cost. Contour and drainage work is covered by the topographic survey in Jaipur process step by step. Cables and water pipes run beneath the old-city paving, and GPR survey in Jaipur at a glance describes how they are traced. Over in Haryana, an identical approach is followed by the Mezux total station survey in Gurugram crews.
Jaipur instrument work at a glance
| Instrument spec | 5 mm + 3 ppm |
|---|---|
| What it is booked for | Bazaar façades, shed pegging, as-builts, corridor frontages |
| Hot-weather routine | Long shots done by late morning; short legs through May–June |
| Verification | Shot from a third pillar; bolts rechecked after the pour |
| Units owned | Six total stations |
| Handover | DWG, PDF, elevations, station coordinates |
Parts of Jaipur we have already worked in: what we do: survey coverage in Jaipur.
Total station rates in Jaipur
From ₹10,000 for a plot up to 1 acre plus ₹3,000 per extra acre; stake-out at ₹8,000 per crew-day.
- Plot survey up to 1 acre: from ₹10,000
- Each extra acre: ₹3,000
- Layout or stake-out: ₹8,000 per crew-day
- As-built: from ₹20,000 per site up to 5,000 sq m; ₹3 per sq m beyond
- Full-time site surveyor with instrument: ₹1,20,000 per month
GST is extra, mobilisation is shown in the written quote only if it applies, and that quote fixes the price. Once the quote is agreed, our Jaipur-based surveyor can be in the Johari Bazaar lanes or at your Sitapura shed within a working day. Share your drawings, then ask for a rate for Jaipur.
Frequently asked questions
What would a boundary survey add?
It adds corner checks against the jamabandi and village map. Read how our land surveyor in Jaipur works.
Should my site use satellites or the optical instrument?
Often both: the global positioning system fixes the control, and the instrument does the close work. See more about DGPS vs Total Station.
Can you survey inside a haveli?
Yes, with access, room by room, tied to the street traverse.
Can you check anchor bolts before erection?
Yes, on a crew-day booked after the pour and before the steel arrives.
Could the crew measure after dark in summer?
Rarely; early mornings give the same benefit more safely.
Can you survey a running factory?
Yes, on a holiday or quiet shift, following the plant’s safety rules.
Get a written total station quote for Jaipur
Jaipur survey pages
Total station elsewhere
Written by Saniya Parveen · Technically reviewed by Rahul Rai · Updated 8 November 2026